The following is the list of all training courses available. Only the latest version is available for new participants. You may have taken a previous version; you can still access it. Older versions may still be accessible through your My Courses page.

These training program was specially designed to help and guide End Users and Service Suppliers in the implementation of ISA/IEC-62443-1-1, 2-1, 2-2, 2-3, 2-4, 3-2, and 3-3 standards. At the same time and on one effort harmonize with popular regulations in energy, oil, and gas segment industries, such as NIST, NERC, C2M2, TSA, INGAA, and more.

Implement, comply and get certified with easy and no hassle. Fully documented proven methodology that really works.

The worst thing that can happen in safety and security is by everyone having a different idea about how to mitigate risk. It would be like having a boat with rowers working in different directions. In the end, no progress is made.

EN50 – Industrial cybersecurity management for projects in the energy, oil and gas sector.

Master industrial cybersecurity project management with the EN50 course from WiseCourses. Tailored for the energy, oil, and gas sectors, this ISA/IEC-62443-aligned program empowers professionals to lead secure-by-design initiatives across critical infrastructure.

This training course provides End Users and Service Suppliers with a proven methodology for implementing ISA/IEC-62443 series of standards – harmonized with popular energy, oil, and gas regulations – with a step-by-step process.

Either you are and End User of Service Providers, if you are interested in implementing ISA/IEC-62443 series to achieve international official certification, this training is absolutely necessary. The ISA/IEC-62443 standards and agnostic ICXX official ISA training courses tell what to do, but do not tell how to implement and comply with all the requirements.

EN60 – Cyber Risk Assessment in New and Existing Industrial Systems in Energy, Oil & Gas.

Master cyber risk assessment for industrial systems in energy, oil, and gas with the EN60 course from WiseCourses. Learn to identify threats, assign Security Levels, and apply ISA/IEC-62443 practices to safeguard both new and legacy OT environments.

This training course provides a proven methodology to perform an industrial risk assessment. While a detailed risk assessment can still be performed with some specific methods that meet ISA/IEC-62443-3-2 set of requirements, sound governance is required. Specific outputs must be produced, at different steps, which will be required by any authority of certification.

This methodology also teaches how to harmonize with popular regulations without creating a Frankenstein that only mitigates the budget of the company and confuses people.

EN61 EN 3v20 – Design and implementation of security in new and existing industrial systems in energy, oil and gas.

Design and implement cybersecurity in industrial systems with WiseCourses’ EN61 program. Learn how to mitigate risks and apply ISA/IEC-62443 practices to secure both new and legacy OT infrastructures across energy, oil, and gas sectors.

This course explains a mature and sound methodology for designing, implementing, and testing the security of one or multiple SUC/IACS and the plant (AUC), before passing to normal operation and maintenance.

Either you are an End User or a Service Supplier implementing ISA/IEC-62443 series of standards, you need to follow a proven methodology and produce auditable evidence to be shown to the authority of certification.

This course covers the Design, Implementation and Acceptance Test activities, which must be executed in a specific sequence.

EN62 EN 3v20 – Assistance in the safe operation and maintenance of safety in industrial systems in energy, oil, and gas.

Ensure the safe and secure operation and maintenance of industrial systems with EN62 from WiseCourses. This ISA/IEC-62443-aligned program equips energy, oil, and gas professionals to monitor, sustain, and improve cybersecurity across the full lifecycle of OT assets.

Once the industrial risk has been mitigated during previous stages, there is still a responsibility to assist to the safe and secure operation of the plant, execute preventive and corrective maintenance as well as continuous improvement and audit for compliance. All these over time. This includes monitoring, detection, and response management.

This training provides the necessary guidance to implement and comply with ISA/IEC-62443 series requirements and popular regulations in energy, oil and gas segment industries with minimal investment and maximum ROI. The best outcome at minim effort with a long-term solution.

EN70 – Security By Design for Control Systems Engineers and Service Providers for Energy, Oil & Gas.

Implement industrial security by design with the EN70 course from WiseCourses. Tailored for control systems engineers and service providers in energy, oil, and gas, this ISA/IEC-62443-aligned program equips you to integrate cybersecurity from the ground up.

This training course has been created to explain how to design safety and security, after and detailed risk assessment, and before jumping directly to implement the SLT and recommendations. We show a proven methodology that really mitigates the risk at minimal budget and best outcome.

There is no other training in the market that deepens in this key and critical step in the success of risk mitigation, that most of the companies are bypassing. If you are a security engineer involved in the design of control systems and industrial processes, this is a mandatory, necessary course.

EN99 EN 3v20 – Good practices in the management of security events and alerts in industrial systems with ISA/IEC-62443.

Enhance your industrial cybersecurity monitoring skills with EN99 from WiseCourses. This ISA/IEC-62443-aligned program teaches best practices for managing security alerts, detecting anomalies, and responding to incidents across energy, oil, and gas OT environments.

This training course focuses on the evaluation, determination, design, implementation, testing, operation and maintenance of monitoring, detection, and response management systems in OT.

Many companies are desperately implementing IDS in learning modes, and SOC/OT solutions wasting the most valuable resources to mitigate nothing but their budgets. These systems and solutions must be designed with contextual information accompanying an effective and efficient mitigation of risk through other activities.

Pricing & Membership

The following table shows the official pricing set for the training Program. Promotions may be available at particular training events. ARPEL memberships can be checked here.

	EN50	EN60	EN70	EN61	EN62	EN99
ARPEL Member	$500	$650	$650	$650	$650	$1000
Non-Member	$700	$950	$950	$950	$950	$1500

Tickets can usually be purchased directly from the training event landing page. If you need a formal proposal, we can issue by request. The formal proposals and invoices will appear accessible at your profile.Brochures and Datasheets

Datasheets & Brochures

Use the links below to open the individual courses datasheets.

EN50

EN60

EN70

EN61

EN62

EN99

FAQ – Frequently Asked Questions

• WBS Training for Energy, Oil & Gas -> Go To

Annual Training Calendar

The following calendar contains the EN training events for 2026 open to the public. These training courses can be delivered in Spanish, Portuguese, and English languages. Dates are subject to change. The exact dates will be shown a few months before.

Current Self-Paced Training Events in English

---

Current Self-Paced Training Events in Spanish

---

Upcoming Training Events for Open Public

---

Subscribe to receive updates on training events

Subscribe to receive updated news on training events.